PCB Assembly #1540048 (Schematic 1540049) requires an upgrade to the reset circuit. The upgrade consists of:

1) COMPONENT CHANGES:

R25	Change To	6.8K ohm,	1/4 W, +/-5%
	Add	220 ohm,	1/4 W, +/-5%
R58	Add	2K ohm,	1/4 W, +/-5%

2) CUT circuit trace near UA1 (See diagram)

3) INSTALL JUMPER WIRES:

BETWEEN:	UA1 pin 8 and UB1 pin 5
	UA1 pin 9 and CR4 Anode
	UB1 pin 6 and UD3 pin 5 BACK of board

4) CUT circuit trace between CR7 Anode and UD3 pin 5 on BACK of board.